MS250 NTP config

[nguzman]

How can I configure or change the NTP server that the meraki switches is using?

[Nash · Accepted solution]

NTP is handled by the Meraki Cloud. You cannot manually configure NTP on Meraki devices nor use them as time servers for other devices on your network.

[nguzman]

Thank you.

[jdsilva]

You can't. Time is set via the Dashboard. All you can do is change the timezone.

[nguzman]

Thank you

[Sc00baSteve]

NTP can be set up in the DHCP Pool as an option (Code 42) on the MX device. Especially if you have non-meraki downstream switches