MS250 NTP config

Solved
nguzman
Conversationalist

MS250 NTP config

How can I configure or change the NTP server that the meraki switches is using?

1 Accepted Solution
Nash
Kind of a big deal

NTP is handled by the Meraki Cloud. You cannot manually configure NTP on Meraki devices nor use them as time servers for other devices on your network.

View solution in original post

6 Replies 6
Nash
Kind of a big deal

NTP is handled by the Meraki Cloud. You cannot manually configure NTP on Meraki devices nor use them as time servers for other devices on your network.

nguzman
Conversationalist

Thank you.
jdsilva
Kind of a big deal

You can't. Time is set via the Dashboard. All you can do is change the timezone.

nguzman
Conversationalist

Thank you
Sc00baSteve
Just browsing

NTP can be set up in the DHCP Pool as an option (Code 42) on the MX device. Especially if you have non-meraki downstream switches

fabferr_SV
Conversationalist

Yes redirections of NTP requests are possibles as you say but only for clients. Meraki's devices are forced to resolve NTP requests with pool.ntp.org

https://documentation.meraki.com/General_Administration/Other_Topics/Upstream_Firewall_Rules_for_Clo...

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels