MS120-8FP-HW which port can be connect internet

[MS120-8FP-HW]

Hi,

I have one quantity MS120-8FP-HW unit, and it difference from other MS Meraki produces, it have not Management port, so that i don't know which port can be connect with internet, which port can be connect with login local.

Additionally, It also was same local login method with "my.meraki.com" or "switch.my.meraki.com".

[cmr]

You can use any LAN port on most devices, out of interest why do you need a local connection, we have never used the local connection on our MSs?

[MS120-8FP-HW]

As you know, some of Meraki produce like 24 ports or 48 ports, they have their own Management port ot login local, so that I can fix some IP issue, which cannot capture automatically.

This means that i can use any Lan port as internet port, right ?

[BrechtSchamp]

Yes. And in dashboard, the port that the switch is using to reach the internet will show up with a little upwards arrow. See port 1 here:

[MS120-8FP-HW]

Ok, I know that one. So I just press buttom and keep for less than 10 seconds, it would erase all configuration as factory default, right ?

[BrechtSchamp · Accepted solution]

Check my answer here for the procedure from experience:

https://community.meraki.com/t5/Switching/Factory-reset-of-a-MS120-8P/m-p/43788/highlight/true#M3674

[MS120-8FP-HW]

Hi Brecht,

I have question for you, how to use local status page to assign it another IP ?

[BrechtSchamp]

See the docs here:

https://documentation.meraki.com/zGeneral_Administration/Tools_and_Troubleshooting/Using_the_Cisco_M...