MS Switch Feature Comparison

pstewart
Getting noticed

MS Switch Feature Comparison

Is there documentation somewhere that explains the differences in features between the MS switches?  For specific example, I've noticed DAI (dynamic ARP inspection) feature is not available on MS120 and MX220 switches - this seems to be a common "theme" with the lower end switches but wasn't clear to me when purchasing them.

5 Replies 5
TerryVasquez
Getting noticed

pstewart, DAI is only supported by Layer 3 MS switches: MS210, MS225, MS250, MS350, MS400 series https://documentation.meraki.com/MS/Other_Topics/Dynamic_ARP_Inspection
Terry VASQUEZ Jr.

Thank you ... and that makes a lot of sense 🙂  What about other feature parity ... is there a doc somewhere that explains what features are available on which switches?  I'd rather not re-invent stuff from a pre-sales perspective to know how switches are positioned for customer needs ... thanks again.

Hi pstewart, Well, they have this one: https://meraki.cisco.com/lib/pdf/meraki_datasheet_ms.pdf Though it only provides basic comparisons (e.g. throughput. number of interfaces). But at the last page it has the links of all MS switches datasheets. You just need to read them one by one 🙂
Terry VASQUEZ Jr.

Thanks ... that's what I was hoping to avoid 🙂  I'm trying to build out some "cheat sheets" for the sales side ... think I'll ping our Meraki rep to see what they have as well ... 

Hahaha!!! That's the best way I guess 😛
Terry VASQUEZ Jr.
Get notified when there are additional replies to this discussion.