Meraki

Rm000 · ‎Mar 22 2021

Hello,

I have different L3 intefaces configured on MS425, i want MS425 to run as the DHCP server. The Interface IP configured isn't the default gateway for the specified subnets, how do i specify the DHCP server to include the external default gateway IP in the lease information?

DarrenOC · ‎Mar 22 2021

You can’t!

Are you able to move the dhcp scopes over to the switches that are the dfg?

Darren OConnor | doconnor@resalire.co.uk
https://www.linkedin.com/in/darrenoconnor/

I'm not an employee of Cisco/Meraki. My posts are based on Meraki best practice and what has worked for me in the field.

DarrenOC · ‎Mar 22 2021

Never tried it but have you tried adding a custom option of 003 (default gateway)?

Believe my colleague got this working on a Meraki stack where we needed such a setup

Darren OConnor | doconnor@resalire.co.uk
https://www.linkedin.com/in/darrenoconnor/

I'm not an employee of Cisco/Meraki. My posts are based on Meraki best practice and what has worked for me in the field.

cmr · ‎Mar 22 2021

@DarrenOC is correct, custom option 3 is your friend. It works perfectly for us. In fact I thought @DarrenOC had set it up...🤣

If my answer solves your problem please click Accept as Solution so others can benefit from it.

DarrenOC · ‎Mar 22 2021

@cmr , you’re right! I remember David asking the same question in fact!

Darren OConnor | doconnor@resalire.co.uk
https://www.linkedin.com/in/darrenoconnor/

I'm not an employee of Cisco/Meraki. My posts are based on Meraki best practice and what has worked for me in the field.

Rm000 · ‎Mar 23 2021

yes but as the last result

Meraki

Community

MS 425 DHCP Default gateway

MS 425 DHCP Default gateway