Hello everyone,
Is Stacking behavior on Meraki MS same like Catalyst Stack Switch? that two stacked switches will have 1 single management IP and SVI configuration
we face some intermittent problem when we want to add another MS410 to become stack with the older one, with these configuration below :
Old Topology
Old MS410 Switch - FW
Management IP Old MS410 Switch : 192.168.1.3/24
SVI Old MS410 Switch as p2p to FW : 192.168.1.3/24
IP p2p on FW side : 192.168.1.1/24
New Topology
(Old MS410 Switch + New MS410 Switch) Stacked - FW
Management IP Old MS410 Switch : 192.168.1.3/24
Management IP New MS410 Switch : 192.168.1.4/24
SVI Stack Switch as p2p to FW : 192.168.1.3/24
IP p2p on FW side : 192.168.1.1/24
we encountered intermittent problem on p2p connection between Stack MS410 to FW by using the New Topology above, could be the problem caused by conflicted IP between these two IP ?
Management IP Old MS410 Switch : 192.168.1.3/24
SVI Stack Switch as p2p to FW : 192.168.1.3/24
Thanks