MS 355 Port Mirroring

SOLVED
Sarv
Conversationalist

MS 355 Port Mirroring

I want to Mirror ports (one-to-one), Mirror trunk port 49 to port 30, then mirror Trunk port 50 to Port 31 on the same switch, it seems that I can not do that? Is this not possible? Each time I try to mirror it forces me to use the same destination port from the previous Mirror I have setup. 

 

Thanks


Sarv

1 ACCEPTED SOLUTION

Accepted Solutions
Inderdeep
Kind of a big deal

Re: MS 355 Port Mirroring

@Sarv : MS switches support one-to-one or many-to-one mirror sessions.   Cross-stack port mirroring is available on  stackable switches. Only one active destination port can be configured per switch/stack.

 

So you can only configure one active destination port not more per switch per stack

https://documentation.meraki.com/MS/Port_and_VLAN_Configuration/Switch_Ports

 

Regards
Inderdeep Singh
www.thenetworkdna.com ( Awarded by Cisco IT Blogs award 2020)

View solution in original post

2 REPLIES 2
Inderdeep
Kind of a big deal

Re: MS 355 Port Mirroring

@Sarv : MS switches support one-to-one or many-to-one mirror sessions.   Cross-stack port mirroring is available on  stackable switches. Only one active destination port can be configured per switch/stack.

 

So you can only configure one active destination port not more per switch per stack

https://documentation.meraki.com/MS/Port_and_VLAN_Configuration/Switch_Ports

 

Regards
Inderdeep Singh
www.thenetworkdna.com ( Awarded by Cisco IT Blogs award 2020)

View solution in original post

Sarv
Conversationalist

Re: MS 355 Port Mirroring

Thank you. 

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels