Location switch with coordinates

Solved
nst1
Building a reputation

Location switch with coordinates

 

I want to add locations to my switches but my equipment is located in locations such as a hill, then the locations with co-ordinates.

 

for example  19°34'59.36"N,  97°18'19.75"O 


but when I add it to the switch it does not accept it and try to remove the "N and" Or also separate it with a "," but it is still the same message

 

location.PNG

1 Accepted Solution
PhilipDAth
Kind of a big deal
Kind of a big deal

Enter the coordinates in "decimal" format, for example:

36.766358,-116.393507

 

When I have to do it, I find the location in Google Maps.  Long left click to "drop a pin".  Right click on the pin and select "What's here".  The GPS co-ordinartes appear down the bottom (from a desktop at least) in the right format for Meraki.

 

Now we just need "plus code" support.

View solution in original post

1 Reply 1
PhilipDAth
Kind of a big deal
Kind of a big deal

Enter the coordinates in "decimal" format, for example:

36.766358,-116.393507

 

When I have to do it, I find the location in Google Maps.  Long left click to "drop a pin".  Right click on the pin and select "What's here".  The GPS co-ordinartes appear down the bottom (from a desktop at least) in the right format for Meraki.

 

Now we just need "plus code" support.

Get notified when there are additional replies to this discussion.