cancel
Showing results for 
Search instead for 
Did you mean: 

Location switch with coordinates

SOLVED
Highlighted
Getting noticed

Location switch with coordinates

 

I want to add locations to my switches but my equipment is located in locations such as a hill, then the locations with co-ordinates.

 

for example  19°34'59.36"N,  97°18'19.75"O 


but when I add it to the switch it does not accept it and try to remove the "N and" Or also separate it with a "," but it is still the same message

 

location.PNG

1 ACCEPTED SOLUTION

Accepted Solutions
Kind of a big deal

Re: Location switch with coordinates

Enter the coordinates in "decimal" format, for example:

36.766358,-116.393507

 

When I have to do it, I find the location in Google Maps.  Long left click to "drop a pin".  Right click on the pin and select "What's here".  The GPS co-ordinartes appear down the bottom (from a desktop at least) in the right format for Meraki.

 

Now we just need "plus code" support.

1 REPLY 1
Kind of a big deal

Re: Location switch with coordinates

Enter the coordinates in "decimal" format, for example:

36.766358,-116.393507

 

When I have to do it, I find the location in Google Maps.  Long left click to "drop a pin".  Right click on the pin and select "What's here".  The GPS co-ordinartes appear down the bottom (from a desktop at least) in the right format for Meraki.

 

Now we just need "plus code" support.

Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels