Link with two 10G SFP+ SR Modules syncs with 1 G and not with 10G

frenz
Here to help

Link with two 10G SFP+ SR Modules syncs with 1 G and not with 10G

Hi Community!

 

I have two MS 225 (one with 24 and the other with 48 Ports) connected via SFP+ 10 - SR Modules! On the Dashboard i can only configure "Auto", "1 Gigabit full duplex (auto)" and "1 Gigabit full duplex (forced)!

 

Any idea why there is no 10G Selection?

 

thx & BR

Wireless, what else?
2 Replies 2
ww
Kind of a big deal
Kind of a big deal

auto should be fine. what is the type nr on both sfp+

jdsilva
Kind of a big deal

You can't set that because the 10GBase-X standards don't allow anything other than Auto negotiation. Hard coding the speed violates the standard. Indeed, even the 1G standards strongly suggest you use auto negotiation as best practice and not hard code speed. 

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels