Latest device for a specific port

[KevinRAB75]

Hello, I would like to know if there is a way to obtain the IP address or MAC address of the last device connected to the port of an MS350-24X switch on a specific date.

[alemabrahao]

You can see the current connected device, but, this does not show historical data for a specific date.

Meraki does not store indefinite history; typically, client data is available for the last 30 days. If you need older data, you would need Syslog or SNMP traps configured beforehand.

[GIdenJoe]

Historical views are only available for clients.
As long as that client was not seen on another port it will show the client as being disconnected and on that port.

So you could go to networkwide -> clients and make sure the switch and switchport column is showing and try to find that port.