Is 4 x 1GE Network Module supported on the C9300-M

Kolby
Just browsing

Is 4 x 1GE Network Module supported on the C9300-M

Is the C9300-NM-4G= (4 x 1GE Network Module) supported on the C9300-M? It is not listed on the datasheet.

2 Replies 2
Mloraditch
Head in the Cloud

It does not appear to be. I would expect you to be steered towards either a 9300L model if buying new or the C9300-NM-8X-M if you  need to migrate an existing unit. I suspect it could be more easily added down the road with the new Native IOS-XE but haven't heard anything specific.

If you found this post helpful, please give it Kudos. If my answer solves your problem please click Accept as Solution so others can benefit from it.
cmr
Kind of a big deal
Kind of a big deal

It would cause problems during onboarding for Meraki management and possibly for Meraki monitoring as well.  However, it may well work once onboarded.  I was going to test exactly this in February, but the DHCP option issues stopped the testing before I got to modules.  Hopefully I'll be in a position to test it soonish as the native IOS-XE release might have fixes for the DHCP options...

If my answer solves your problem please click Accept as Solution so others can benefit from it.
Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels