I have an MS250-24P and it is the only device in my Network.
in the configure 4 different VLANs, try to do a test from the Tools tab of the MS pinging between VLAN but it was not possible to show me "Loss rate: 100%, Average latency: N / A"
where can I configure Inter VLAN ??
Yes, for example
10.130.156.0/24 10.130.156.1
150.130.170.0/24 10.130.170.1
150.130.190.0/24 10.130.190.254
Is your trunk port allowing all VLANs? You're saying that you have a MS250 do you have anything else in the equation? Other switches etc?
Unless you have some policy added to deny communication between the Vlans , pinging from one PC to another should go through . Let us know once you tried 🙂 .