cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

How to create layer 3 interfaces on MS?

SOLVED
Conversationalist

How to create layer 3 interfaces on MS?

How do I properly create and configure a layer 3 interface on Meraki switches? Can’t seem to find a L3 tab.
1 ACCEPTED SOLUTION

Accepted Solutions
Building a reputation

Re: How to create layer 3 interfaces on MS?

On a compatible device such as a MS320-24 switch you can find the Layer 3 Routing tab under Switch > Monitor > Switches > Your Selected Compatible Switch then on the header tab the 4th tab has an L3 Routing option.  This feature will however need to be enabled under Switch > Configure > Routing and DHCP > Then adding an Interface to route to/from. I've included screenshots of these sections. 

3 REPLIES 3
Here to help

Re: How to create layer 3 interfaces on MS?

Do  you have a supported model for Layer 3? Check this page:

 

https://documentation.meraki.com/MS/Layer_3_Switching/MS_Layer_3_Switching_Overview

Building a reputation

Re: How to create layer 3 interfaces on MS?

On a compatible device such as a MS320-24 switch you can find the Layer 3 Routing tab under Switch > Monitor > Switches > Your Selected Compatible Switch then on the header tab the 4th tab has an L3 Routing option.  This feature will however need to be enabled under Switch > Configure > Routing and DHCP > Then adding an Interface to route to/from. I've included screenshots of these sections. 

Conversationalist

Re: How to create layer 3 interfaces on MS?

Thanks, this worked for me!

Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.