Hi all,
I have host specific routes on my switch. The switch is a cisco WS-C2960X-24PS-L.
How can i configure this type of host specific routes on my Meraki switch MS225?
Switch#sh ip route
Default gateway is 10.36.2.253
Host Gateway Last Use Total Uses Interface
192.168.33.3 10.36.9.253 0:03 198716 Vlan9
10.33.3.99 10.36.9.253 0:00 1450 Vlan9
192.168.33.4 10.36.9.253 0:03 46370 Vlan9
192.168.33.22 10.36.9.253 0:54 30 Vlan9
192.168.33.246 10.36.9.253 1:17 1 Vlan9
192.168.102.227 10.36.9.253 1:17 0 Vlan9
192.168.102.227 10.36.9.253 0:11 0 Vlan9