Etherchannel Hashing

RobinsonRoca
Getting noticed

Etherchannel Hashing

Does anyone know what hashing algorithm for load balancing Meraki is using when LACP is enabled?  src-mac, dst-mac, src-dst-mac, XOR

 

I'm having a strange interaction between a stack of meraki switches, and a fortinet firewall.  The Firewall is using src-dst-ip, but I want to match the firewall to the switch.

2 Replies 2
Ryan_Miles
Meraki Employee
Meraki Employee

https://documentation.meraki.com/General_Administration/Tools_and_Troubleshooting/Link_Aggregation_a...

Ryan

If you found this post helpful, please give it Kudos. If my answer solves your problem please click Accept as Solution so others can benefit from it.
KarstenI
Kind of a big deal
Kind of a big deal

What is your "strange interaction"? Often matching the algorithms will not give the desired behaviour. In General:

  • If the destination is a L3 device, never use dst-mac
  • If the source is a L3 device, never use src-mac
  • if both are L3 devices never use dst-mac, src-mac or src-dst-mac
  • The more information is used in the load balancing decision, the better the load-sharing will be
  • A single flow will always end up on a single LAG-member
Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels