cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

DHCP / routing with template binding

SOLVED
Conversationalist

DHCP / routing with template binding

Hi everyone,

I'm wondering where I can find the option DHCP and Routing after binding a network to a template. I can't find it under the template configuration and network switch configuration.
I might be just blind and I'm sure you guys can help me.

Best regards
Fabian

1 ACCEPTED SOLUTION

Accepted Solutions
Meraki Employee

Re: DHCP / routing with template binding

Unfortunately MS configuration templates only work with L2 deployments today, so that's why you're not seeing the "Routing and DHCP" configuration option when the switches are bound to a template. 

https://documentation.meraki.com/MS/Deployment_Guides/Switch_Templates_Deployment_Guide_(CVD)

 

3 REPLIES 3
Kind of a big deal

Re: DHCP / routing with template binding

What kind of device is being used?  MX?  MS?

Meraki Employee

Re: DHCP / routing with template binding

Unfortunately MS configuration templates only work with L2 deployments today, so that's why you're not seeing the "Routing and DHCP" configuration option when the switches are bound to a template. 

https://documentation.meraki.com/MS/Deployment_Guides/Switch_Templates_Deployment_Guide_(CVD)

 

Highlighted
Here to help

Re: DHCP / routing with template binding

Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.