Copper SFP support for Meraki switches

Solved
EnzoLabruzzo
Here to help

Copper SFP support for Meraki switches

Does the Meraki MS-355-48 Switch model support Copper SFP modules

1 Accepted Solution
EnzoLabruzzo
Here to help

Thank you, Alemabrahao.

View solution in original post

3 Replies 3
alemabrahao
Kind of a big deal
Kind of a big deal

Yup.

 

alemabrahao_0-1675106878309.png

 

https://documentation.meraki.com/General_Administration/Cross-Platform_Content/SFP_and_Stacking_Acce...

I am not a Cisco Meraki employee. My suggestions are based on documentation of Meraki best practices and day-to-day experience.

Please, if this post was useful, leave your kudos and mark it as solved.
EnzoLabruzzo
Here to help

Thank you, Alemabrahao.

cmr
Kind of a big deal
Kind of a big deal

10Gb modules from FS.com also work, if you can get them physically into the socket.  Some of the 355s have sunken SFP+ ports so for those you need an RJ-45 adapter with the bottom corner sliced off in the same manner as the Meraki ones do.

If my answer solves your problem please click Accept as Solution so others can benefit from it.
Get notified when there are additional replies to this discussion.