Changing the VLAN on stack switches

[AnkitSharma1]

Hi Expert,

We have three floors. We are using two switches on each floor, and now we have added one more switches on each floor, and all the new switches are added to a stack. I see all the new switch ports showing under management VLAN 1

How can I isolate MGT traffic and move all the ports from VLAN 1 to another master switch VLAN?

[alemabrahao]

I don't understand your question, are you referring to the configuration of the switches' physical ports or the switch's management VLAN?

It got a little confusing.

https://documentation.meraki.com/MS/Other_Topics/Switch_Settings#Management_VLAN

[alemabrahao]

Check it out.

https://documentation.meraki.com/MS/Port_and_VLAN_Configuration/Configuring_Multiple_Switch_Ports_on...

[cmr]

Go to the Switches/Switch ports view, click on all the ports you want to change and change them to access mode and a different VLAN as below: