CIsco SFP 10GLR module supports in Meraki Switch?

Jobsp
Getting noticed

CIsco SFP 10GLR module supports in Meraki Switch?

I would like to know do the Cisco 10G LR sfp modue for catalyst switch is compatible with the Meraki MS 225 & MS210 switch?

4 Replies 4
RWelch
Kind of a big deal
Kind of a big deal

This article provides technical data on Fiber Transceivers and stacking accessories compatible with Meraki devices.

Small-Form Factor Pluggable (SFP) and Stacking Accessories 

If you found this post helpful, please give it Kudos. If my answer solves your problem please click Accept as Solution so others can benefit from it.
Jobsp
Getting noticed

I am asking whether Catalyst 10g module which is SFP 10G-LR will work on meraki models?

RWelch
Kind of a big deal
Kind of a big deal

Hi @Jobsp

Thanks for that clarification.  

The link provided to you has the ability to narrow down your SFP module and specify which models of switches work with the specific model.  Unfortunately your post didn't specify the full module (just 10Gig and LR type).  

ENTER THE TRANSCEIVER PRODUCT ID and all compatible models will be displayed.

Screenshot 2025-10-13 at 07.37.03.png

 

Screenshot 2025-10-13 at 07.26.32.png

If you are looking for a LR type module that works with Meraki MS switches, the MA-SFP-10GB-LR is listed for your consideration, however the MS210 series isn't listed likely because it's not 10Gig compatible.

 

Screenshot 2025-10-13 at 07.49.03.png

If you found this post helpful, please give it Kudos. If my answer solves your problem please click Accept as Solution so others can benefit from it.
RWelch
Kind of a big deal
Kind of a big deal

As best I recall, the MS210 accepts 1gig but not 10gig modules.

If you found this post helpful, please give it Kudos. If my answer solves your problem please click Accept as Solution so others can benefit from it.
Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco ID. If you don't yet have a Cisco ID, you can sign up.
Labels