MS125s connecting to MS425 as core switches. I have management vLAN and all IPs statically set. We have 14 switches in this location and I was trying finish deployment by installing the last 5 today. First 3 went normally, connect them to network, let them boot, reboot, and then plug in everything else. By the time that's done, I check the dashboard and can see the switch is online with the right IP and ports are showing up. No problem.
Well, the 2nd to last switch does it's thing shows green on dashboard, but nothing else. No port information, never shows RSTP Root, never updates the IP... but it's working. vLANs are working, clients are getting IPs and connecting fine, etc. I messed with it for a while - rebooting and trying different uplink ports. No change. I move on to the last switch (thinking if I stop watching the pot boil.. ) I get it online, see it's connected - same problem.
Local status page shows Healthy, shows the proper IP, shows me port information... but dashboard is still not. I closed Chrome and went back in, no change. I have a case open, but was posting to see if anything else ran into this?