cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

site to site VPN Meraki MX64

Highlighted
Comes here often

site to site VPN Meraki MX64

I have issue with site to site vpn need some assitance to fix this issue.
as i have 3 sites
site 1 has connectivity with site 2 & site 3 but
site 2 has connectivity with just site 1
site 3 has connectivity with just site 1
site 2 & site 3 has some connectivity issue between
Please support me to fix these issue

4 REPLIES 4
Highlighted
Kind of a big deal
Kind of a big deal

Re: site to site VPN Meraki MX64

Site 2 and 3 are configured as vpn Hub?

Highlighted
Comes here often

Re: site to site VPN Meraki MX64

yes 

Highlighted
Getting noticed

Re: site to site VPN Meraki MX64

When you select the Network for Sites 2 or 3, does the subnet for the other site appear in the Route Table for that MX?

 

Select Network for Site 2. Go to Security & SD WAN > Route Table. Does the subnet for Site 3 appear in the list?

 

Under Site-to-Site VPN settings, do you see Site 3 and its subnet listed in the "Remote VPN participants" list?

Are there any rules defined under the "Site-to-site outbound firewall" section?

 

If you do a traceroute from a host in Site 2 to a host in Site 3, what happens?

Highlighted
Comes here often

Re: site to site VPN Meraki MX64

yes config is OK but the problem is connectivity is not stable sometimes it is up and sometimes goes down

 

Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.