how to add ip-range MX64

SOLVED
pwb
Here to help

how to add ip-range MX64

What is the syntax for a ip range in allowed remote ip's under port forwarding? I cant use x.x.x.x-x.x.x.y or x.x.x.x:x.x.x.y

 

1 ACCEPTED SOLUTION
PhilipDAth
Kind of a big deal
Kind of a big deal

You can use CIDR notation (e,g. 192.168.0.0/24), and you can comma separate entries, but you can not specify a range.

View solution in original post

4 REPLIES 4
PhilipDAth
Kind of a big deal
Kind of a big deal

You can use CIDR notation (e,g. 192.168.0.0/24), and you can comma separate entries, but you can not specify a range.

ok, but why do i then get not a valid ip range if i cant use range att all? But i could use cidr so thanks for help.

PhilipDAth
Kind of a big deal
Kind of a big deal

I don't know.

DCooper
Meraki Alumni (Retired)
Meraki Alumni (Retired)

You need to use a comma between the CIDR notations. Ex. "192.168.1.5,172.16.0.0/12".

 

Please see see this document https://documentation.meraki.com/MX-Z/NAT_and_Port_Forwarding/Troubleshooting_Port_Forwarding_and_NA...

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels