disable uplink alerting for non-connected wans

J2ITGroup-JHill
Conversationalist

disable uplink alerting for non-connected wans

We have some MX67c's out there that do not have cellular cards in them. I would like to disable the alerting so they don't show on the wan health that they are down.  We know they're not connected.  We also have some that show a wan3 but its not even a port converted from LAN to WAN.  Bug or feature request?  THanks!

5 Replies 5
RWelch
A model citizen

Give your feedback (previously Make a Wish) 

If you found this post helpful, please give it Kudos. If my answer solves your problem please click Accept as Solution so others can benefit from it.
PhilipDAth
Kind of a big deal
Kind of a big deal

Alas there is no way to configure this aspect of alerting.

BlakeRichardson
Kind of a big deal
Kind of a big deal

I have the same issue, I just ignore it. 

If you found this post helpful, please give it Kudos. If my answer solves your problem, please click Accept as Solution so others can benefit from it.
J2ITGroup-JHill
Conversationalist

True, i could but with a ton of these devices its leaving a messy dashboard.  make a wish it is 🙂

BlakeRichardson
Kind of a big deal
Kind of a big deal

I get where you are coming from. An "unconfigured" tick box would be a simple solution. 

If you found this post helpful, please give it Kudos. If my answer solves your problem, please click Accept as Solution so others can benefit from it.
Get notified when there are additional replies to this discussion.