hello
i have 2 vlans: 10.0.0.0/24 for production and 10.0.1.0/24 for guests
i'd like to block inter-vlan traffic and share a printer (10.0.0.50) and a nas (10.0.0.10) between the 2 vlans
i configured the mx as shown in the screenshot:
the problem is that from a guest computer i can see the nas but not the printer.
Solved! Go to solution.
sorry guys i've got it....
the printer had a wrong gateway configured....
A couple of things to try that always work for me:
Doing these two things usually allow me to make my exceptions with zero issues.
they are on the same wired network
yes all the ports are configured on the right vlan and no isolation.
the nas port and the printer one are configured in the same way
sorry guys i've got it....
the printer had a wrong gateway configured....