Z3 and Umbrella SIG

[Yutnakam]

Hi all,

Can Z3 connect to Umbrella SIG?

I believe Z3 can connect to Umbrella DNS security, but not IPSec connections.

Only MX can connect. Is this correct?

Z3 and Cisco Umbrella

https://community.meraki.com/t5/Security-SD-WAN/Z3-and-Cisco-Umbrella/m-p/94752

MX and Umbrella SIG IPSec Tunnel

https://documentation.meraki.com/MX/Site-to-site_VPN/MX_and_Umbrella_SIG_IPSec_Tunnel

Regards,

Yuta

[KarstenI]

I didn't yet test it. But from the Z3/MX side, it is "just" a non-Meraki-VPN that can be configured both on the MX and also on the Z3, When looking at the config, there is nothing that could not be done on a Z3. So I would expect that it will work.

[Yutnakam]

Thanks for the answer.
If it's the same as MX, I can separate the VPN communication to SIG and to the head office, right?

[KarstenI]

Yes, the HQ-network is a smaller subnet and will take precedence over the default-route for SIG.