What better strategy to put 3 ISP links on a Meraki MX that only supports 2 ?

SOLVED
AlessandroNet5
Just browsing

What better strategy to put 3 ISP links on a Meraki MX that only supports 2 ?

What better strategy to put 3 ISP links on a Meraki MX that only supports 2 ?

 

I have 3 internet links and only two interfaces mo Meraki

 

The best solution would be to put a traffic balancer before the firewall ?

1 ACCEPTED SOLUTION
Owen
Getting noticed

If its a HA setup you can have two links on one MX, one link on the backup.

 

Only other alternative is a router in front of the MX. If possible get some additional public IP's associated with the WAN services so you don't have to NAT on the router from ISP to the MX.

View solution in original post

1 REPLY 1
Owen
Getting noticed

If its a HA setup you can have two links on one MX, one link on the backup.

 

Only other alternative is a router in front of the MX. If possible get some additional public IP's associated with the WAN services so you don't have to NAT on the router from ISP to the MX.

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels