cancel
Showing results for 
Search instead for 
Did you mean: 

Verification of flow preference

SOLVED
Conversationalist

Verification of flow preference

Hello All, I have been through a few posts to find a way to verify that a flow preference configured to route Internet traffic over WAN2 is taking effect. Traceroutes/ICMP apparently aren't helpful since it will only use WAN1. The VPN status page doesn't seem to be a good place for Internet traffic. I don't see anything for WAN2 under uplink decisions, if that section of the page even loads. Is the only option really a 'what is my ip' on a client machine or doing some kind of packet capture from the MX? I am working remotely and waiting on output for a 'what is my ip' and traceroute from a client machine but I would love to be able to confirm via the dashboard. WAN2 is active.

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Kind of a big deal

Re: Verification of flow preference

Do a capture on WAN2. That will give you conclusive evidence.

4 REPLIES
Kind of a big deal

Re: Verification of flow preference

There isn't much in the dashboard for Internet flows. There is a graph under Security > Appliance status that kinda shows this:

 

image.png

 

I can't think of anything else Smiley Sad

Highlighted
Kind of a big deal

Re: Verification of flow preference

Do a capture on WAN2. That will give you conclusive evidence.

Conversationalist

Re: Verification of flow preference

Thanks for the response jdsilva. I have been looking at that but was hoping for something more detailed. I guess that's as good as it gets for now.

Conversationalist

Re: Verification of flow preference

Thanks PhillipDAth, I just did that.