VPN use Active Directory for authentication

Solved
HaniAbuelkhair4
Getting noticed

VPN use Active Directory for authentication

Appreciated your support on this case 

 

Today i have windows server been used as VPN server, and now since we have the Meraki i need to shift the VPN from the windows server to the Meraki and i still need to use the active directory for user authentication.

 

I found this document but my question is 

 I have the following documentation and my question is

https://documentation.meraki.com/MX/Content_Filtering_and_Threat_Protection/Configuring_Active_Direc...



Do i need to to add the active directory on Log into Dashboard and navigate to Security & SD-WAN > Configure > Active Directory first then configure the VPN authentications or i have to do the client VPN authentication directly?


And can i do that in parallel to the to the existing service on the VPN windows server for easy migration ?

1 Accepted Solution
PhilipDAth
Kind of a big deal
Kind of a big deal

You only need to do the bit for client VPN authentication.

https://documentation.meraki.com/MX/Content_Filtering_and_Threat_Protection/Configuring_Active_Direc... 

You only need to configure the bits on the client VPN tab.

View solution in original post

4 Replies 4
PhilipDAth
Kind of a big deal
Kind of a big deal

You only need to do the bit for client VPN authentication.

https://documentation.meraki.com/MX/Content_Filtering_and_Threat_Protection/Configuring_Active_Direc... 

You only need to configure the bits on the client VPN tab.

HaniAbuelkhair4
Getting noticed

Thanks for the update 

Any special configuration need to be done of the AD side ?

HaniAbuelkhair4
Getting noticed

  • If no certificate is present, it will be necessary to install a Self-Signed certificate.
  • If a certificate already exists, please ensure that it has been configured with the necessary parameters for TLS
  • is this must on the AD server .
HaniAbuelkhair4
Getting noticed

Still i am getting error 

HaniAbuelkhair4_0-1654784073581.png

 

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels