VPN Clients are identified via their MAC address and a @meraki.com prefix

Solved
Johnny55
Here to help

VPN Clients are identified via their MAC address and a @meraki.com prefix

Hey folks

 

I don't know if this situation is specific to my own organization, please bear with me ...

When looking at the list of connected devices via the Meraki Client VPN (Network-Wide -> Clients -> clientType:client-vpn) the only info I can use to identify clients is their MAC address and a sm_1234567809@meraki.com domain address. That's the info showing up under the 'Description' and 'User' collumn respectivelly. Those clients get their VPN configuration via the SM.

At the opposite, for manually configured clients added in 'User management' (Security & SD-WAN -> Client VPN) what's listed under the 'User' collumn is the 'Email (Username)' info from 'User management'. That is fine.

 

So is there a way to get the 'Device Name' to show up or anything else that would make the process of identifying the clients easier?

 

Thanks for your feedback!

1 Accepted Solution
PhilipDAth
Kind of a big deal
Kind of a big deal

Unfortunately, no.

 

Cisco AnyConnect does show the username correctly, and is a *much* better VPN client, but it does cost extra (not that much IMHO).

https://documentation.meraki.com/MX/Client_VPN/AnyConnect_on_the_MX_Appliance 

View solution in original post

1 Reply 1
PhilipDAth
Kind of a big deal
Kind of a big deal

Unfortunately, no.

 

Cisco AnyConnect does show the username correctly, and is a *much* better VPN client, but it does cost extra (not that much IMHO).

https://documentation.meraki.com/MX/Client_VPN/AnyConnect_on_the_MX_Appliance 

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels