UI: Config Template | Security & SD-WAN | Routing | Subnets | Add VLAN | Subnet: UI Issue

david_n_m_bond
Getting noticed

UI: Config Template | Security & SD-WAN | Routing | Subnets | Add VLAN | Subnet: UI Issue

In the UI: Config Template | Security & SD-WAN | Routing | Subnets | Add VLAN | Subnet UI

 

Setting the subnet mask for a 10.0.0.0 VLAN has a bad UI issue.  The user will set the subnet mask THEN the IP address (because data entry is left to right).  However, setting the IP address to a 10.x.x.x address UNSETs the value in the subnet mask back to /10.

 

The user must then RE-ENTER the subnet mask.

 

This is counter-intuitive and not easy to spot.

 

Fix needed.

 

Author, https://www.nuget.org/packages/Meraki.Api/
0 REPLIES 0
Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels