cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Traffic shaping rules --- match all traffic?

SOLVED
Getting noticed

Traffic shaping rules --- match all traffic?

I'd like to create a traffic shaping rule on my MX67 that matches all traffic not matched by the higher priority rules. Is there a particular syntax to match everything? I can't seem to figure it out.

1 ACCEPTED SOLUTION

Accepted Solutions
Kind of a big deal ww
Kind of a big deal

Re: Traffic shaping rules --- match all traffic?

you can add all private ranges in the last rule. 

localnet:192.168.0.0/16, localnet:10.....

or maybe just 1 rule localnet:0.0.0.0/0 (not sure about this one)

2 REPLIES 2
Kind of a big deal ww
Kind of a big deal

Re: Traffic shaping rules --- match all traffic?

you can add all private ranges in the last rule. 

localnet:192.168.0.0/16, localnet:10.....

or maybe just 1 rule localnet:0.0.0.0/0 (not sure about this one)

Highlighted
Getting noticed

Re: Traffic shaping rules --- match all traffic?

I tried the 0.0.0.0/0 and it works. I tested it by creating a rule and setting an abitrary DSCP value and then running a pcap on the outside interface to confirm that DSCP value was being set. Thanks!
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.