Testing Out Equipment

[JJS1992]

Good evening everyone,

This may be a dumb question/idea but what I want to do is test and connect a streaming device box to one of my MX67 that I have at home, and leave one here that I have at work that is pulling services as I work for an ISP and we have our own streaming app, and devices. We wanted to test this all the way through and I know it's feasible but not sure where to begin.

I know I would have to create a VLAN tunnel between work, and home.

Create a VPN in the Meraki dashboard

Any advice, comments, steps, procedures would be greatly appreciated!

Thank you all for your time.

[BlakeRichardson]

@JJS1992 This guide should help you.

https://documentation.meraki.com/MX/Site-to-site_VPN/Configuring_Hub-and-spoke_VPN_Connections_on_th...

I would configure the MX in your office as the hub and the MX at home as the spoke that way if other staff want to do the same they configure their MX as an additional spoke. If the MX are within the same ORG it's all very easy. If they are not in the same org you need to follow the below guide.

https://documentation.meraki.com/MX/Site-to-site_VPN/Configuring_Site-to-site_VPN_between_MX_Applian...