Teleworker Z3 (14.53) - Bad Gateway Event Log

SOLVED
Nik1
Here to help

Teleworker Z3 (14.53) - Bad Gateway Event Log

Hello, 

 

Have been seeing bad gateway (no lan connectivity) event logs periodically throughout the Z3 deployments. Documentation states that it is tied to an arp request issue (upstream home router), looking to get a detailed explanation and also wondering if any one else has seen these issues? 

 

The Z3 has to be rebooted for it to regain VPN connectivity, thanks.

 

Nik

1 ACCEPTED SOLUTION
Seshu
Meraki Employee
Meraki Employee

Hello @Nik1 

 

The MX/Z Firewalls run connection monitoring tests to monitor the connection on the WAN side. These include, ARP requests to the local gateway, ping to 8.8.8.8, DNS resolutions for meraki.com, google.com and yahoo.com and Dashboard Connectivity tests.

 

If anyone of these fails, the error would be shown on the appliance Uplink. Bad Gateway means that the ARP response from the gateway is possibly having issues getting to the Z3.

 

https://documentation.meraki.com/MX/Monitoring_and_Reporting/MX_Client_Connectivity_Monitoring

https://documentation.meraki.com/MX/Firewall_and_Traffic_Shaping/Connection_Monitoring_for_WAN_Failo...

 

Please let me know if you have any further questions.

 

Regards,

Meraki Team

 

View solution in original post

2 REPLIES 2
Seshu
Meraki Employee
Meraki Employee

Hello @Nik1 

 

The MX/Z Firewalls run connection monitoring tests to monitor the connection on the WAN side. These include, ARP requests to the local gateway, ping to 8.8.8.8, DNS resolutions for meraki.com, google.com and yahoo.com and Dashboard Connectivity tests.

 

If anyone of these fails, the error would be shown on the appliance Uplink. Bad Gateway means that the ARP response from the gateway is possibly having issues getting to the Z3.

 

https://documentation.meraki.com/MX/Monitoring_and_Reporting/MX_Client_Connectivity_Monitoring

https://documentation.meraki.com/MX/Firewall_and_Traffic_Shaping/Connection_Monitoring_for_WAN_Failo...

 

Please let me know if you have any further questions.

 

Regards,

Meraki Team

 

Nik1
Here to help

Thank you for the information. 

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels