Support Request for Bonjour Forwarding

[MauroF]

First of all, a big thank you to the entire community for the incredible support you provide every day. Whenever I face a problem, the community has always helped me solve it. So, once again, thank you all!

Now, back to the issue: I have a wired VLAN 30 where my Mac Pros cannot discover the Wi-Fi printers located on another VLAN (WiFi VLAN).

To enable this discovery, should I go to the Firewall section and configure Bonjour Forwarding? Thanks!

Dr Walsh

[alemabrahao]

How are Wireless clients accessing LAN configured?

https://documentation.meraki.com/MR/Firewall_and_Traffic_Shaping/MR_Firewall_Rules

https://documentation.meraki.com/MR/Client_Addressing_and_Bridging/Bonjour_Forwarding

[MauroF]

Those are just allow...in fact is not the WIFI trying to connect  to the wired IP but the opposite....grom the Wired to the Wifi.

[alemabrahao]

I believe Bonjour is not a problem. Can you at least ping the printers?

Check your routing, firewall rules, etc.

[MauroF]

From the wired i can ping the printer in the WLAN.

[alemabrahao]

Is the SSID not configured with DHCP in NAT mode correct? Can you share the SSID and Firewall settings?