I want to deploy around 100+ MX67W on remote sites (1 MX per site). Each site has always 2 Internet routers to which the MX67W will be connected. The WAN 1 and WAN 2 ports will be configured to obtain IP addresses with DHCP from the Internet routers.
I tested with a quick lab and noticed that the MX67W worked fine with WAN 1 and WAN2 using the same IP adress 192.168.1.1 (provided by the Internet routers).
I have a few basic questions here 😊:
1. how it works (same IP on both uplinks) behind the scene? are WAN 1 and WAN2 ports on different VRF or something like that? Is it documented somewhere?
2. Is there any potential problem if we proceed the deployment like that (all uplinks of 100+ MX 67W will use the same IP 192.168.1.1)?
Thanks for your advice.