Meraki

Riser · ‎Nov 1 2022

If we actually purchase the MX105 with the SFP+ Modules, will that work with our current 1GB connection or the connection has to be over 1GB?

cmr · ‎Nov 1 2022

As mentioned in the other post, a 10Gb fibre SFP+ transceiver usually only connects at 10Gb

If my answer solves your problem please click Accept as Solution so others can benefit from it.

Riser · ‎Nov 2 2022

Say I have a 2GB link. what is recommended? The SFP goes to 1GB and SFP+ needs 10GB.

cmr · ‎Nov 2 2022

If you have a 2Gb link then it should be presented by the provider on an SFP+ port that runs at 10Gb. Therefore, you would want a 10Gb transceiver in the SFP+ port on the Meraki.

If my answer solves your problem please click Accept as Solution so others can benefit from it.