SFP+

Riser
Getting noticed

SFP+

If we actually purchase the MX105 with the SFP+ Modules, will that work with our current 1GB connection or the connection has to be over 1GB?

3 REPLIES 3
cmr
Kind of a big deal
Kind of a big deal

As mentioned in the other post, a 10Gb fibre SFP+ transceiver usually only connects at 10Gb

Riser
Getting noticed

Say I have a 2GB link. what is recommended? The SFP goes to 1GB and SFP+ needs 10GB.

cmr
Kind of a big deal
Kind of a big deal

If you have a 2Gb link then it should be presented by the provider on an SFP+ port that runs at 10Gb.  Therefore, you would want a 10Gb transceiver in the SFP+ port on the Meraki.

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels