S2S vpn working - http page not working

[route_map]

Hi Guys

So i have a home MX 64 and a Work MX65 setup for S2S vpn

i eventually got my s2s vpn to work. so at work i have Eve-NG running my labs address is 192.168.20.210

so i can ping this address from my home network but i cannot http to it, not sure why.

when i am in the office i can easily access 192.168.20.210, any ideas?

[BrechtSchamp]

Most likely a firewall issue. Figure out which firewalls could be blocking the connection.

• Firewall on the server itself could be setup to only allow connections for the local subnet.
• The s2s VPN firewall could be limiting the access: https://documentation.meraki.com/MX/Site-to-site_VPN/Site-to-site_VPN_Firewall_Rule_Behavior
• There could be another firewall in between the MX and the server.

Another possibility is a proxy server configured in the browser.

[PhilipDAth]

It is also possible that the Eve-NG software also allows you to limit where you can access it from.

[route_map]

Hi 

There is not firewall on the server blocking

there is no other firewall between mx and server

there is no proxy server settings configured

below rules