Replacement MX info

[MauroF]

In my network, I need to replace my MX84 with an MX95. I’d like to know if, once I remove the MX84 from the network and add the new MX95, the configuration (L3 VLANs, etc.) will be retained, or if I’ll need to reconfigure everything.

Thanks.

Mauro

[KarstenI · Accepted solution]

Most of your config is retained. But you need to reconfigure your VLAN-to-port mapping as this is different on the new device. And the new MX will start with site-to-site VPN disabled.

[MauroF]

Karstenl you are always the one that helps me so much. Thanks for your great help!

[KarstenI]

Great when you get the help you need in this community. Come back often ... 😉