Redirection to a spoke site

[MariamT]

Hello all,

I am installing Meraki MX85 on 5 sites , a hub site and 4 spokes .

On one spoke I have a website on a LAN server , to get to this website from the internet , the request is first sent to the hub where there's a fortinet FW (That will be replaced by an MX85) , this FW send the request to the spoke site via a redirecting rule .

My client want to keep the same configuration : 

to get to the website hosted on a lan server of the spoke , requests should be sent to the HUB ( MX 85 ) and then from the hub the request is sent via SD-WAN to the spoke.

I tried to add a Nat rule but it's not working as the subnet of that server isn't declared on the hub .

Does anyone have an idea of how I can route traffic sent to this spoke site via SD-WAN  please?

Thanks .

[alemabrahao]

Unfortunately its not possible.

[KarstenI]

Trying to achieve it that way is just asking for trouble. These two ways are proven to work:

1. Move the server into a DMZ at the hub location.
2. Place a reverse proxy in a DMZ at the hub to forward the request to the spoke.