Meraki

Community

Red no identificada cisco meraki MX64

configure una nueva vlan como se muestra a continuación pero al momento de conectar una PC en este me sale red no identificada, el dhcp si me asigna una ip, me podrían ayudar por favor

11 Replies 11

La configuración de DHCP que está mostrando está configurada para no responder a las solicitudes de DHCP.

¿El servidor DHCP será MX o un servidor dedicado?

I am not a Cisco Meraki employee. My suggestions are based on documentation of Meraki best practices and day-to-day experience.

Please, if this post was useful, leave your kudos and mark it as solved.

Es un servidor dedicado administrado por un switch aruba Instan On 1960

You need to enable the DHCP relay on the MX configuring you DHCP server IP.

I am not a Cisco Meraki employee. My suggestions are based on documentation of Meraki best practices and day-to-day experience.

Please, if this post was useful, leave your kudos and mark it as solved.

si esta configurado, una consulta que tenga también configurado un Windows server afecta a esta configuración

Pero ¿por qué tienes dos servidores DHCP?

Sin el relay configurado no funcionará.

I am not a Cisco Meraki employee. My suggestions are based on documentation of Meraki best practices and day-to-day experience.

Please, if this post was useful, leave your kudos and mark it as solved.

En la configuración del DHCP esta colocado que no responda a la solicitud, existe alguna forma de comprobar la configuración que me diga que esta bien hecha

You should have to configure it.

DHCP Relay provides a way for DHCP clients to communicate with DHCP servers when none are available on its local subnet. A Relay Agent uses IP routing to forward discover messages to a provisioned DHCP server. The relay agent then relays the DHCP offer back to the client network.

I am not a Cisco Meraki employee. My suggestions are based on documentation of Meraki best practices and day-to-day experience.

Please, if this post was useful, leave your kudos and mark it as solved.

https://documentation.meraki.com/MX/DHCP/Configuring_DHCP_Relay

I am not a Cisco Meraki employee. My suggestions are based on documentation of Meraki best practices and day-to-day experience.

Please, if this post was useful, leave your kudos and mark it as solved.

muchas gracias

(Sorry for English).

I need a bit more information. Are you connecting a PC directly to the firewall or are you connecting to a switch?

If you are connecting it directly to the firewall, you have to enable DHCP requests for it to be assigned the IP you specified in that range.

esta conectado al puerto 13 del swicth aruba donde esta Untagged la vlan 45 y tagged las demas vlans

Welcome to the Meraki Community!

To start contributing, simply with your Cisco ID. If you don't yet have a Cisco ID, you can .