cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Public IP (UPLINK)

SOLVED
Getting noticed

Public IP (UPLINK)

Hi Everyone,

 

Hope you're all well.

 

I have a question regarding Public IP. On the MX450, I have an uplink on Ethernet1 having /29 subnet. Is it possible to distribute the usable IP on one of the Meraki MX interfaces (for example: ports 3-25). One of our non Meraki equipment need a to receive a public IP that is not natted. 

 

Any recommendation on how i can do it on a Meraki MX device? 

 

Would appreciate your advice.

 

Thank you.

1 ACCEPTED SOLUTION

Accepted Solutions
Kind of a big deal

Re: Public IP (UPLINK)

The only way to do that would be to operate the MX in layer 2 mode - but that fundamentally changes a lot of things, so you wouldn't want to do that.

 

You could use a switch/VLAN on the outside of the MX, and plug your device into that (outside of the MX firewall).

 

Otherwise no.

 

View solution in original post

2 REPLIES 2
Kind of a big deal

Re: Public IP (UPLINK)

The only way to do that would be to operate the MX in layer 2 mode - but that fundamentally changes a lot of things, so you wouldn't want to do that.

 

You could use a switch/VLAN on the outside of the MX, and plug your device into that (outside of the MX firewall).

 

Otherwise no.

 

View solution in original post

Getting noticed

Re: Public IP (UPLINK)

Hi Philip,

I see, i think that is one of the limitations of the Meraki MX. I hope they can improve this side of the Meraki MX like the other firewalls.

Thank you for the response Philip.

Appreciated it.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.