Printing when VPN Connected

Solved
tman
Conversationalist

Printing when VPN Connected

I am trying to figure out how to allow local LAN access when using AnyConnect for my clients that are connecting to the MX. The issue is redirected printing through the local client via USB or IP on the LAN when using Remote Desktop RDP sessions. The option is set on the Anyconnect client but the MX will not allow it. It is working with my ASAv10. Any help would be appreciated. 

 

 

1 Accepted Solution
rhbirkelund
Kind of a big deal
Kind of a big deal

Configure Split Tunneling like shown in the screen shot and add 0.0.0.0/32 to the list. This should provide local access to printers, while still being on VPN.

rhbirkelund_0-1731528782722.png

 

https://documentation.meraki.com/MX/Client_VPN/AnyConnect_on_the_MX_Appliance#Local_LAN_access

LinkedIn ::: https://blog.rhbirkelund.dk/

Like what you see? - Give a Kudo ## Did it answer your question? - Mark it as a Solution 🙂

All code examples are provided as is. Responsibility for Code execution lies solely your own.

View solution in original post

3 Replies 3
rhbirkelund
Kind of a big deal
Kind of a big deal

Configure Split Tunneling like shown in the screen shot and add 0.0.0.0/32 to the list. This should provide local access to printers, while still being on VPN.

rhbirkelund_0-1731528782722.png

 

https://documentation.meraki.com/MX/Client_VPN/AnyConnect_on_the_MX_Appliance#Local_LAN_access

LinkedIn ::: https://blog.rhbirkelund.dk/

Like what you see? - Give a Kudo ## Did it answer your question? - Mark it as a Solution 🙂

All code examples are provided as is. Responsibility for Code execution lies solely your own.
CptnCrnch
Kind of a big deal
Kind of a big deal

I'd love to be able to mark this a the solution 😉

tman
Conversationalist

Thanks this does work. Might be an audit issue going forward. I appreciate your help.

 

Get notified when there are additional replies to this discussion.