Policy to deny failover to back-up circuits for select VLANs or groups

SOLVED
Louis
Here to help

Policy to deny failover to back-up circuits for select VLANs or groups

Hi guys! I am attempting to enforce a policy for two VLANs, wherein one VLAN can failover to a back-up circuit while the other doesn't.

 

I am sure we can enforce a policy for one VLAN to prefer an uplink in the MX and failover to a back-up uplink either due to link failure or poor performance. However, I am not sure if we can configure a policy in MX that can enforce a VLAN to a desired uplink, but with no failover.

 

Any help or suggestions will do.

 

Thank you

1 ACCEPTED SOLUTION
PhilipDAth
Kind of a big deal
Kind of a big deal

When you use a USB cellular modem it remains offline until the primary circuit(s) have failed, and then it is bought online.

 

View solution in original post

4 REPLIES 4
PhilipDAth
Kind of a big deal
Kind of a big deal

Unless it is a USB 4G failover, it can not be done.

Thank you @PhilipDAth. I assume that the USB port is active, i.e., with a cellular modem connected to it. 

PhilipDAth
Kind of a big deal
Kind of a big deal

When you use a USB cellular modem it remains offline until the primary circuit(s) have failed, and then it is bought online.

 

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels