Non Meraki VPN to Private Peer

hoss82
New here

Non Meraki VPN to Private Peer

Hello all,

 

We have a client that has a MX84. They also have a Palo Alto that is managed by another vendor but sits inside the network and they have servers that sit behind the Palo Alto. Is it possible to configure a non Meraki VPN between the MX and the Palo using a private IP for the peer address? If you have any other questions please let me know

1 Reply 1
GIdenJoe
Kind of a big deal
Kind of a big deal

You can only form IPsec VPN's over the WAN IP's of an MX.  So if both firewalls exist next to eachother behind an upstream router then you could easily have an IPsec VPN between them even if their WAN IP's are in the RFC1918 range.
However if the Palo Alto is at the LAN side of the MX you will be out of luck.

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels