Non Meraki VPN Peer Configuration (DPD)

SOLVED
endrianusgohan
Getting noticed

Non Meraki VPN Peer Configuration (DPD)

Hi, 

 

Does Meraki support DPD (Dead peer detection) ? 

Cause my branch appliances using DPD in its settings. 

1 ACCEPTED SOLUTION
endrianusgohan
Getting noticed

Hi, 

 

It's solved already. 

 

Yes, Meraki does have the default setting for DPD. 

 

The timer is set to 10 seconds by default, with 5 retries and a max fail count of 5.

View solution in original post

5 REPLIES 5
PhilipDAth
Kind of a big deal
Kind of a big deal

I'm about 75% confident it does.  DPD is a negotiated setting.

Where can I find this settings ? 

endrianusgohan
Getting noticed

Hi, 

 

It's solved already. 

 

Yes, Meraki does have the default setting for DPD. 

 

The timer is set to 10 seconds by default, with 5 retries and a max fail count of 5.

Hi @endrianusgohan ,
Can you please share document link also.
Thanks

@Foysol , 

 

The support engineer didn't give me any document link to this configuration, but I can share the screenshot from his solution to my case.

 

Screen Shot 2021-07-29 at 07.16.39.png

Hopefully that helps.

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels