cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Network management system receiving alerts from MX450 "Dynamic Meraki Appliance Load"

Comes here often

Network management system receiving alerts from MX450 "Dynamic Meraki Appliance Load"

HI - any ideas what this means? Tried googling it without success - and there are no corresponding logs in the event logs... its considered "Major" but no clues as to what this means!

 

Cheers

3 REPLIES 3
Here to help

Re: Network management system receiving alerts from MX450 "Dynamic Meraki Appliance Load"

I would start by analyzing your dynamic path selection for SD-WAN.  Also check to see if VPN load balancing is turned on.

Kind of a big deal

Re: Network management system receiving alerts from MX450 "Dynamic Meraki Appliance Load"

Open a case with support.

 

Are you running a recent 14.x code release?

Comes here often

Re: Network management system receiving alerts from MX450 "Dynamic Meraki Appliance Load"

Will do - Thanks for all suggestions so far...
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.