Netflow with Solarwinds

[AnkitSharma1]

Team,

We have configured SolarWinds on a Windows server and enabled NetFlow from the Meraki dashboard.

I see NetFlow traffic leaving the Meraki, but I do not see any NetFlow traffic on the Windows server when I run Wireshark. SolarWinds is also not receiving the data because of this. I have already checked that port 2055 is enabled.

Please advise me 

[PhilipDAth]

If you run WireShark on the server do you see any traffic hitting it from the source sending the NetFlow data?

If you do a packet capture on the patch in between - do you see the data there?

Repear till you narrow it down.

[AnkitSharma1]

Screenshot from MX

When i run the Wireshark on windows server i don't see any communication with 2044 port going to meraki however meraki is sending the net flow traffic if you see the above image

ip.addr == 10.100.xx.xx && udp.port == 2055