NATting traffic with a 3rd party VPN peer due to subnet overlap

Tokerau
Just browsing

NATting traffic with a 3rd party VPN peer due to subnet overlap

Hello,

I'm new-ish to the MX routers. We need to create a VPN between our MX and a non-Meraki router. Our subnet is 192.168.0.0/22.

I was told by the 3rd party that our networks overlap (apparently they se the same subnet) so they asked if we could NET our traffic to a different IP subnet.

In looking at the 3rd party VPN peer setup, I can't figure out a way to do this.

 

Is this done on the Site to Site VPN config screen or somewhere else? Can it be done at all?

 

Thanks!

1 REPLY 1
ww
Kind of a big deal
Kind of a big deal

You cant do that, its only for auto vpn.

So the other side has to do it. Or you can change your subnet

 

https://documentation.meraki.com/MX/Site-to-site_VPN/Using_Site-to-site_VPN_Translation#Consideratio...

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels